Outback-power-systems VFX Series International Programming Manual Manuel d'utilisateur télécharger pdf (Page 37)

PRESS <INC> UNTIL 141,

THEN PRESS ENTER.

STACKING SYSTEM EXAMPLES

OutBack Parallel Stacking

• Four FXs in a single system are referred to as a Quad Stack.

• The FX installed at the bottom of the stack is plugged into Port 1 of the HUB.

• The second, third, and fourth FXs are plugged into Ports 2, 3, and 4 respectively.

ADV/PASSWORD-------------

enter the password

132

ENTER INC DEC EXIT

ADV/SETTINGS/WARNING

changes made could adversely

a ect system performance

MAIN----------------------

8:25:04A

SUM STATUS SETUP ADV

ADV/FX/PG2-----------------

choose category:

PG1 GRID GEN PG3

ADV/FX/PAGE 1--------------

choose category:

ADV INV CHGR PG2

ADV----------------------------

choose a device:

FX CC DC MATE

ADV/FX/STACK-----------P02

stack 1-2ph Master

phase

DOWN INC DEC PORT

ADV/FX/STACK---------P01

stack 1-2ph Master

phase

DOWN INC DEC PORT

ADV/FX/PAGE3---------------

choose category:

PG2 AUX STACK PG4

ADV/FX/STACK---------P04

stack OB Slave L1

phase

DOWN INC DEC PORT

ADV/FX/STACK----------P03

stack OB Slave L1

phase

DOWN INC DEC PORT

Push the <PORT> soft key until

Port 01 appears.

Press the <PORT> soft key until

Port 02 appears. Press the <INC>

soft key twice until the stack

phase ob slave L1 screen appears.

Press the <PORT> soft key until

Port 03 appears. Press the <INC>

soft key twice until the stack phase

ob slave L1 screen appears.

Press the <PORT> soft key until

Port 04 appears. Press the <INC>

soft key twice until the stack phase

ob slave L1 screen appears.

At completion, each Slave FX in Ports 2, 3, and 4 will be in parallel with the Master in Port 01. Addi-

tional Slaves can also be programmed as OB Slave L1 following the instructions above. All the Slave FXs

connected to Ports 2, 3, and 4 are now in parallel with the Master in Port 01. Remain in this screen. The

next step is to rank the Slaves in relation to the Master.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Outback-power-systems VFX Series International Programming Manual Manuel d'utilisateur Page 37

Commentaires sur ces manuels

Produits connexes et manuels pour Fournisseurs d'énergie Outback-power-systems VFX Series International Programming Manual