Outback-power-systems VFX Series International Programming Manual Manuel d'utilisateur télécharger pdf (Page 27)

Once the MATE recognizes each FX (and OutBack Charge Controller), push and hold the  rst two soft

keys simultaneously to return to the MAIN menu. To program the FXs, go to the ADV/FX/STACK menu

on the MATE navigating with the following steps:

Press the <ADV> soft key.

NOTE: Pressing and holding the  rst two soft keys

at the same time will always bring up the Main

Menu screen.

Push any soft key on the ADV/SETTINGS/

WARNING screen and go to the ADV/PASSWORD

screen.

MAIN--------------------------

12:12:16A

SUM STATUS SETUP ADV

ADV/SETTINGS/WARNING

changes made could

adversely a ect

system performance

PROGRAMMING THE FXS

The screen displays 132. Press the <INC>

button until it scrolls to the password 141.

ADV/PASSWORD---------------

enter the password

132

ENTER INC DEC EXIT

ADV/PASSWORD----------------

enter the password

141

ENTER INC DEC EXIT

Push the <ENTER> soft key.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 55 56

Pas de commentaire

Outback-power-systems VFX Series International Programming Manual Manuel d'utilisateur Page 27