Outback-power-systems VFX Series Programming Manual Manuel d'utilisateur télécharger pdf (Page 22)

LED Color LED Action LED Indicates

Green Solid GREEN Inverter ON

Flashing GREEN Search Mode/Slave Power

Off Inverter OFF

Yellow Solid YELLOW AC Source is Connecteced

Flashing YELLOW AC Input Live-Waiting to

Connect to the FX

Off No AC Input Present

Red Solid RED Error-Error Message,

displays on the MATE

Flashing RED Warning: Non-critical FX

fault, the MATE can access

this information

AC Breakers O DC Breakers On

2. With the FXs connected to the HUB, turn only the DC breakers ON and power up the components.

All AC breakers should be OFF.

NOTE: For 3-phase stacking, the jumper in the HUB must be set to the 3ph position.

See the HUB Communications Manager User Guide for further information.

NOTE: Powering up the FXs can cause the red

ERROR STATUS light to blink. After 5-10 seconds,

the green INVERTER light should be bright and

the ERROR and AC IN lights dark. The FX is now

producing AC output voltage.

BYPASS OUTPUT INPUT

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 58 59

Pas de commentaire

Outback-power-systems VFX Series Programming Manual Manuel d'utilisateur Page 22